Table of Contents
Advertisement
Keyboard
1
Select the field to change, and
select [Keyboard].
2
Use the keyboard shown in the
touch screen to enter a new value.
For information about how to enter
characters, refer to "Specifying
Destination Using the Keyboard Screen"
(P.116) or "Entering Specific Symbols"
(P.116) in [Basic Features].
Specifying a Forwarding Destination
Enter values for the fields appropriate to the selected protocol, and specify a forwarding
destination to save to.
1
Select the field to configure, and
select [Keyboard].
Note
2
Enter values using the keyboard
shown.
Note
Server
Displayed when either [FTP] or [SMB] is selected. Enter either the server name or
server IP address. Up to 64 characters are allowed.
Example Server Name: dccf450.fujixerox.com
Shared Name
Displayed when [SMB] is selected. Enter the Shared Name. Up to 64 characters are
allowed.
Save in:
Displayed when either [FTP] or [SMB] is selected. Enter a directory. Up to 128
characters are allowed.
Save in
Displayed when [SMB (UNC Format)] is selected. Enter "\\Host Name\Shared
Name\Directory Name". Up to 260 characters are allowed.
Login Name
Enter the login name for the computer you are forwarding to. 32 characters are allowed.
When forwarding using SMB, this field can be omitted if the recipient does not require it.
Password
Enter the password for the login name. 32 characters are allowed.
Important • A maximum of 14 characters can be entered in the LAN Manager environment.
• You can also choose [Address
Book] to enter a recipient from
the Address Book.
• Fields displayed vary depending on the selected protocol.
(dccf450: Host Name, fujixerox.com: Domain Name)
Scan to FTP/SMB
5
169
Advertisement
Table of Contents
