Table of Contents
Advertisement
15 Maintenance
10
Insert the drum cartridge as far as
possible while keeping it straight.
Note
11
Lift up the handle to return it to its
original position.
12
Pull down the stopper to lock the
handle in place.
15
13
Close the front cover.
Note
Replacing the Staple Cartridge
When a Staple Finisher (optional) is installed and it is time to replace the staple
cartridge, a message appears on the touch screen. When this message appears,
replace the staple cartridge with a new one.
Important • The use of staple cartridges not recommended by Xerox may impair quality and
Note
1
Make sure that the machine has
stopped and then open the front
cover of the Finisher.
416
• Place the protective cover as
is into the box.
• A message will be displayed and the machine will not operate if the front cover is even
slightly open.
performance. Use only staple cartridges recommended by Xerox for the machine.
• To order a staple cartridge, contact our Customer Support Center.
Advertisement
Table of Contents
