Fuji Xerox Document centre C360 User Manual page 236

Document centre
Hide thumbs Also See for Document centre C360:
Table of Contents

Advertisement

10 Paper and Other Media
3
Load paper with the side to be
copied or printed on facing down,
and insert the paper lightly along
the paper guide on the front side of
the machine until it comes to a stop.
Important • Do not load mixed paper types
4
Lightly push the paper guide
against the paper you loaded.
5
Select copying or printing.
Moving the Position of the Paper Guide
If using paper for prints or copies whose width exceeds that of A3 (297mm), move the
paper guide.
Important • After you have finished making copies or prints, be sure to return the paper guides to the
1
Slide the paper guide on the front
side of Tray 5 (bypass) to the <12"
(305 mm)> or <12.6" (320mm)>
10
position.
234
into the tray.
• Do not load paper exceeding
the maximum fill line. Doing so
might cause paper jams or
machine trouble.
• When making copies or
printing on thick-stock paper
such as postcards, and the
paper is not fed into the
machine, apply a curl to the
leading edge of the paper as
shown in the figure on the
right. Note, however, that
excessively bending or folder
the paper might cause paper
jams.
<Normal> position.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Document centre c450Document centre c250

Table of Contents