Shelf Or Desktop Installation; Power And Grounding - Motorola EX-3524 Installation Manual

18

3.2 Shelf or Desktop Installation

The switch can be installed on any flat surface such as a desktop or shelf. To mount the switch on a flat surface:
1. Attach the four adhesive feet to the bottom of the switch.
2. Set the device on a flat surface near an AC power source, making sure there are at least two inches of
space on all sides for proper airflow.
3. If installing multiple switches, attach four adhesive feet to each switch. Place each device squarely on top
of the one below, in any order.

3.3 Power and Grounding

The switches require power from an external AC power supply that can provide 100 to 240 VAC, 50-60 Hz. A
standard AC power socket is located on the rear panel EX-3524 (left) and EX-3548 (right) of the each switch.
EX-3524/EX-3548 Layer 2 Gigabit Ethernet PoE/PoE+ Switch