Data Throughput Capacity - Motorola PTP 600 Series User Manual

16.2 Data Throughput Capacity

Table 47, Table 48, Table 49, Table 50 and Table 51 show the data throughput rates
(Mbits/s) that are achieved when two PTP 600 Full ODUs are linked and the link distance
(range) is 0 km. Use the curves in Section 16.3 to adjust these figures to allow for link range.
NOTE: When using these tables, be aware of the following points:
x
PTP 600 Lite data rates are half the PTP 600 Full rates given in this section.
x
Modulation Mode "256QAM 0.81 dual" is not available in all product variants and channel
bandwidths.
x
Throughput for Link Symmetry 2:1 is the same as that for 1:2, but the Tx and Rx data
rates are swapped.
x
The data rates for Adaptive symmetry apply to the most asymmetric case where the link
has significant offered traffic in one direction only. The data rates for Adaptive symmetry
with bidirectional offered traffic are the same as those for Link Symmetry = 1:1 with Link
Optimization = IP.
279
16 Data Rate Calculations