Operational Restrictions - Motorola PTP 600 System User Manual

Region Frequency
Code Band
12 5.4 GHz
13 5.4 GHz
16 2.5 GHz
19 5.8 GHz
When shipped from the factory units
•
PTP 600 Series Bridge 2.5 GHz – Region Code 16
•
PTP 600 Series Bridge 5.4 GHz – Region Code 12
•
PTP 600 Series Bridge 5.8 GHz – Region Code 1
5.4

Operational Restrictions

5.4.1 Radar Avoidance
Radar Avoidance requires that equipment used in the region:
•
Detects interference from other systems and avoids co-channel operation with these
systems, notably radar systems.
•
Provide on aggregate a uniform loading of the spectrum across all devices, i.e. Fixed
Frequency operation is not allowed.
•
Radar avoidance is not applicable to the PTP25600 product.
7
The EIRP limit is approximately 63dBm + 10 x Log(360/Antenna Azimuth BW)
8
Note that 2.5 GHz, 5.8GHz and 5.4GHz are different products.
9
Note that the Quickstart Guide also contains the license keys for region 10. This bars operation in
the Band 5600 – 5650 MHz and MUST be used for equipment deployed in Canada and Australia.
Regulations /
Countries
ETSI, USA
Australia,
Canada
USA
India
Table 6 – PTP 600 Series Bridge Region Code Definitions
8
are configured as follows:
7 F
Max Tx EIRP
Power Limit
7dBm 30dBm
7dBm 30dBm
23dBm >=63dBm
13dBm 36dBm
9
8 F
49
Operational
Restrictions
(see Section 5 .4)
9 9 6 H
Radar Avoidance Enabled
Radar Avoidance Enabled;
Weather Radar Band
(5600 to 5650MHz) barred
7
Licensed Band operation
6 F
5.825MHz to 5.850MHz
Only