Typical Deployment; Figure 1-1 Typical Ptp 600 Series Bridge Deployment - Motorola PTP 48600 User Manual

User Guide: PTP 600 Series

Typical deployment

The PTP 600 Series Bridge consists of an identical pair of units deployed one at each
end of the link. The radio link operates on a single frequency channel in each direction
using Time Division Duplex (TDD). One unit is deployed as a master and the other as a
slave. The master unit takes responsibility for controlling the link in both directions.
The PTP 600 Series Bridge is aimed at a wide range of applications. An example
application is an enterprise that has a requirement to connect together the Local Area
Network (LAN) of two or more buildings as shown in

Figure 1-1 Typical PTP 600 Series bridge deployment

Each end of the link consists of:
•
Outdoor Unit (ODU): An integrated (or connectorized - see
Connectorized PTP 600
and networking electronics.
•
PIDU Plus: An indoor connection box containing a mains power supply, status
indicators and network connection port.
A pair of units is normally supplied pre-configured as a link.
phn-0896_009v003
Feb 2010
series) outdoor transceiver unit containing all the radio
UNDER DEVELOPMENT
Typical deployment
Figure 1-1.
Chapter 8
1-3