Rear Seat Belt Replacement - Honda Civic Service Manual

I
I
Rear Seat Belt Replacement
NOTE: Check the rear seat belts for damage, and
replace them if necessary. Be careful not to damage
t h e m d u r i n g r e m o v a l a n d i n s t a l l a t i o n .
Rear Seat Belt
1 . R e m o v e t h e r e a r s e a t c u s h i o n ( s e e p a g e 2 0 8 0 ) .
2. Remove the lower anchor bolt {A}.
l . \ J ,
R e m o v e t h e r e a r s i d e t r i m p a n e l ( s e e p a g e 2 0 - 5 1 ) .
Remove the retractor mounting self-tapping ET
screw (A), and the retractor bolt (B), then remove
the rear seat belt (C) and retractor {D).
B
7/16-20 UNF
3 ,
4 .
A
6 x 1 . 0 m m
3.4 N.m {0.35 kgl m,2.5 lbf.ftl
A
7/16-20 UNF
32 N.m (3.3 kgf.m,
24 tbf.ftl
N m {3.3 kgf.m,2ir lbf.ft)
5. Installthe seat belt in the reverse order of removal,
and note these items:
. lf the threads on the retractor mounting self-
tapping ET screw are worn out, use an oversized
self-tapping ET screw (P/N 90133-524-0030)
m a d e s p e c i f i c a l l y f o r t h i s a p p l i c a t i o n .
. Apply liquid thread lock to the anchor bolt before
r e i n s t a l l a t i o n .
' Check that the retractor locking mechanism
functions {see page 23-9).
. Before installing the anchor bolt, make sure there
are no twists or kinks in the rear seat belt.
(cont'd)
23-7