Epson AcuLaser CX-11N/AcuLaser CX-11NF Field Repair Guide
DISASSEMBLY/ASSEMBLY
Right Side Cover Assembly Removal
Removing the Right Side Cover Assembly can be difficult if the instructions below are not followed explicitly. If
these instructions are not followed, It is quite possible to damage the cover. Follow the steps listed below to remove
the Right Side Cover Assembly.
1.
Open COVER ASSY TOP.
2.
Open COVER FRONT ASSY U.
3.
Open COVER MSI.
4.
Remove the 4 screws (silver, with flange, 8 mm) fastening the Right Side Cover Assembly to the main unit.
5.
Lift up at the 3 points depicted in the figures on the following 2 pages to unhook the 3 hooks at the top of the
Right Side Cover Assembly from the holes on the main unit.
C A U T I O N
If you use a tool such as a flat blade screwdriver, take care not to gouge or mar the
Right Side Cover.
6.
Lift up on the Right Side Cover Assembly and remove the Right Side Cover Assembly.
Printer Component,
Software Item,
manuals4you.com
manuals4you.com
LCD Display,
Printer Button
9/9/05
Page 36.