Oam Configuration Example; Oam Remote Loopback Configuration Example - Zte ZXR10 2900 Series User Manual

Command
set ethernet-oam port
zte(cfg)#
<portlist> link-monitor frame-seconds
threshold <1-900> window <10-900>
Error frame accumulation event is the accumulation seconds of
error frame in a period which is generated by switch. When the
error frame accumulation seconds is no less than the threshold,
the error frame summary event will be generated.
The parameter threshold <1-900>: the accumulation sec-
onds of error frame. The default value is 1 second.
The parameter window <10-900>: period,the default value
is 60 seconds.
11. To show OAM configuration information, use the following com-
mand.
Command
show ethernet-oam [port
zte(cfg)#
[<portlist>{ discovery | statistics |
link-monitor}]]
When the command is used without any parameter, OAM global
configuration information will be shown.
The parameter port: shows the port configuration information
that OAM is enabled.
The parameter discovery: shows the OAM state and configu-
ration information on local and the peer that is discovered by
a specified port, including port OAM discovery period, mode,
and the detection for relative link and the loopback.
The parameter statistics: shows the statistics information of
link events on the designated ports.
The parameter link-monitor: shows the link detection con-
figuration information and the various error frames of the des-
ignated ports.

OAM Configuration Example

OAM Remote Loopback Configuration Example

OAM monitor function can notify the abnormal frame of link re-
ceiver to the local. The function is based on OAM discovery. The
user logs in to the switch through console port and configures OAM.
Enable OAM and the port link monitor of the other end. Then the
error frame and the error symbol can be detected and notify local
switch. A network structure is shown in
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 7 Service Configuration
Function
This configures error
frame summary.
Function
This shows OAM
configuration
information.
Figure 76.
189