F
101 LACP B
IGURE
ASIC
Egress mirroring source port and destination port can be con-
figured in this page. After setting, click Apply to submit to
complete the configuration.
LACP Management
1. Click directory tree Configuration > Lacp > Lacp Port on
the left of main page, open LACP basic information page, as
shown in
Figure
A
P
TTRIBUTE
AGE
The page information includes:
i. LACP basic information
–
[AdminStatus]:LACP enable
–
[LacpPriority]:LACP priority
ii. aggregation port information
–
[GroupNum]: aggregation group number that aggre-
gation port belongs to
–
[GroupMode]: aggregation group aggregation mode
that port belongs to
–
[LacpTime]: aggregation port timeout mode
–
[LacpActive]: aggregation port active/passive mode
set basic attributes of "AdminStatus" and "LacpPriority" in this
page and set attributes of "LacpTime" and "LacpActive" of ag-
gregation port. After setting, click Apply to submit to complete
the configuration.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 8 Network Management
101.
229