Table of Contents
Advertisement
ZXR10 2900 Series User Manual
20
Confidential and Proprietary Information of ZTE CORPORATION
F
7 RS-2800-2GE-SFP S
IGURE
There are 2 indicators on the FGFI panel: ACT1 and ACT2, corre-
sponding to the two gigabit optical ports respectively. When the
indicator is on, it indicates that LINK is normal. If the indicator is
flashing, it indicates that there is packet being received or sent.
FGFE
FGFE offers 1 gigabit Ethernet uplink optical port and 1 gigabit
Ethernet uplink electrical port. The type is RS-2800-2GE-SFPRJ45,
as shown in
Figure
F
8 RS-2800-2GE-SFPRJ45 S
IGURE
There are 3 indicators on the FGFE panel. The gigabit optical port
has an indicator ACT. When the indicator is on, it indicates that
LINK is normal. If the indicator is flashing, it indicates that there
is packet being received or sent. The gigabit electrical port has
two indicators: one is link activation indicator and the other is link
status indicator.
1. If the link activation indicator is flashing, it indicates that there
is packet being received or sent.
2. When link status indicator is on, it indicates that the LINK is
normal.
FBFE
FBFE offers two 100M Ethernet uplink optical ports, and the type
is RS-2800-2FE-SFP, as shown in
-
(FGFI)
UB
BOARD
8.
-
UB
BOARD
Figure
(FGFE)
9.
Advertisement
Table of Contents
