Command Mode; User Mode - Zte ZXR10 2900 Series User Manual

4. Enable web network management function (by default, this
function is disabled) and set listening port.
set web enable
set web listen-port < 80,102549151 >
Note:
The default username is admin and the password is zhongxing.
The administrator password is empty. If login with administrator
account number, administrator password cannot be empty. There-
fore set administrator password first. The default http listening
port is 80.
The detailed web remote logging and configuration refer to Con-
figuring System Login.

Command Mode

To facilitate the configuration and management of the switch, the
commands of the ZXR10 2609/2809/2818S/2826S/2852S are al-
located to different modes according to the functions and author-
ities. A command can be executed only in the specified mode.
The ZXR10 2609/2809/2818S/2826S/2852S command modes in-
clude:

1. User mode

2. Global configuration mode
3. SNMP configuration mode
4. Layer 3 configuration mode
5. File system configuration mode
6. NAS configuration mode
7. Cluster management configuration mode
8. Basic ACL configuration mode
9. Extended ACL configuration mode
10. Layer 2 ACL configuration mode
11. Hybrid ACL configuration mode
12. Global ACL configuration mode
User Mode
When you log in to the switch through the HyperTerminal or Telnet,
you can enter the user mode after entering the login username
and password. The prompt character in the user mode is the host
name followed by ">" as shown below:
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 5 Usage and Operation
47