Table of Contents
Advertisement
ZXR10 2900 Series User Manual
16
Confidential and Proprietary Information of ZTE CORPORATION
4. One console port is to realize the management and configura-
tion of various services.
ZXR10 2952 Interfaces
The following indicators are adopted on the front panel of ZXR10
2952.
�
There are 48 indicators on the front panel of ZXR10 2952, in-
dicating the LINK/ACT status of the 48 10/100 Base-T ports.
There are two indicators on the top of each column. The left
indicator shows the status of the lower port (odd port). The
right indicator shows the status of the upper port (even port).
�
Four indicators show the status of two 10/100/1000 BASE-T
port. Each port has two indicators. The left indicator of port
shows ACT status. The right indicator of port shows LINK sta-
tus.
�
Two indicators show the LINK/ACT status of two 1000BASE-X
ports. The indicators on the right side of optical port, each
port has an indicator. The upside indicator corresponds to the
upside optical port, the downside indicator corresponds to the
downside optical port.
�
Two system indicators show power indicator (SYS) and running
indicator (RUN).
Indicators running status are described as follows:
1. System indicators include power indicator (SYS) and running
indicator (RUN).
After the system is powered up, the SYS indicator is on and
�
the RUN indicator is off.
When BootROM starts to load the version, if the version is
�
unavailable, the states of indicators do not change. If the
version is loaded normally, the RUN indicator flashes at a
frequency of one time per second.
2. The indicators of ZXR10 2952 (except power and system indi-
cators) are shown in
T
4 I
ABLE
NDICATOR
Indicator
10/100 Base-T
Ports
Table
4.
W
S
ZXR10 2952
ORKING
TATE OF
Position
State
On the left
Flashing
side of port,
it shows the
status of the
lower port (odd
port)
On the right
side of port,
it shows the
status of the
upper port
(even port)
Meaning
Ports are UP.
Advertisement
Table of Contents
