Zte ZXR10 2900 Series User Manual page 122

ZXR10 2900 Series User Manual
110 Confidential and Proprietary Information of ZTE CORPORATION
Command
set zesr domain <domai
zte(cfg)#
nId>{add|delete}{primary-port |
primary-trunk | secondary-port |
secondary-trunk}<portId | trunkId>
5. To add/delete and configure the edge port, use the following
command.
Command
set zesr domain <domainId>
zte(cfg)#
level <levelId> seg <segId>{add | dele
te}{edge-port | edge-trunk}<portId |
trunkId>[notmaster | master]
The parameter [notmaster|master] is used for the combina-
tion of master nodes belonging to the various layers. The port
attribute is that the edge port can send health frame as mas-
ter node in fixed time to check the related packet and switch
the link state. This attribute can only be set in the node with
attribute EDGE_MASTER.
6. To add/delete control VLAN in ZESR domain, use the following
command.
Command
set zesr domain <domainId
zte(cfg)#
>{add | delete} control-vlan <vlanId>
7. To add/delete the MSTP instance that the service VLAN be-
longs, use the following command.
Command
set zesr domain <domainI
zte(cfg)#
d>{add | delete} protect-instance
<instanceId>
8. To configure the interval for sending hello packet and timeout
interval, use the following command.
Command
set zesr domain <domainId>
zte(cfg)#
hello-timer <1-3> fail-timer <3-9>
The parameter hello-timer : The sending time interval. The
unit is second and it is 1s by default.
The parameter fail-timer : The timeout. The unit is second
and it is 3s by default.
Function
This adds or deletes
the primary and
secondary ports .
Function
This adds/deletes and
configures the edge
port.
Function
This adds/deletes
VLAN in ZESR domain.
Function
This adds/deletes
the MSTP instance
that the service VLAN
belongs.
Function
This configures the
interval for sending
hello packet and
timeout interval.