Table of Contents
Advertisement
ZXR10 2900 Series User Manual
zte>
The default host name is zte. The user can modify the host name
by using the command hostname <name>.
In the user mode, you can execute the command exit to exit the
switch configuration or execute the command show to display the
system configuration and operation information.
Note:
The command show can be executed in any mode.
Global Configuration Mode
In the user mode, enter the enable command and the correspond-
ing password to enter the global configuration mode, as follows:
zte>enable
Password:***
zte(cfg)#
In the global configuration mode, you can configure various func-
tions of the switch. Thus, use the command set user <name>
admin-password [<string>] to set the password for entering
the global configuration mode to prevent the login of unauthorized
users.
To return to the user mode from the global configuration mode,
use the exit command.
File System Configuration Mode
In the global configuration mode, execute the command config
tffs to enter the file system configuration mode, as shown below:
zte(cfg)#config tffs
zte(cfg-tffs)#
In the file system configuration mode, you can operate on the
switch file system, including adding file directory, deleting file or
directory, modifying file name, displaying file or directory, chang-
ing file directory, uploading/downloading files through TFTP, copy-
ing files, formatting Flash, and so on.
To return to the global configuration mode from the file system
configuration mode, use the command exit or press <Ctrl+Z>.
Layer 3 Configuration Mode
In the global configuration mode, execute the command config
router to enter the layer 3 configuration mode, as shown in the
following example:
48
Confidential and Proprietary Information of ZTE CORPORATION
Advertisement
Table of Contents
