Zte ZXR10 2900 Series User Manual page 142

ZXR10 2900 Series User Manual
130 Confidential and Proprietary Information of ZTE CORPORATION
1 1 false
/*view the user online state when the user is online*/
zte(cfg-nas)#show igmp snooping vlan
Num VlanId
--- -------
1 4000
zte(cfg)#show iptv client index 0
Index :0
Rule :1
Port :1
Mac :00.00.02.00.00.11
Channel UserType
---------
1 order
2. Example 2
As shown in Figure
the preview user of channel 225.1.1.1. The maximum preview
time is 20 seconds, the interval is at least 10 seconds and
the maximum preview time is 2. The user vlan is 100. The
multicast vlan is 4000. Router sends data stream of multicast
group 225.1.1.1. PC sends request for entering into channel
225.1.1.1.
Configuration of switch:
i. Configure VLAN
zte(cfg)#set vlan 100 add port 1
zte(cfg)#set vlan 4000 add port 1，4
zte(cfg)#set vlan 100，4000 enable
zte(cfg)#set port 1 pvid 100
zte(cfg)#set port 4 pvid 4000
/*IGMP Snooping*/
zte(cfg)#set igmp snooping enable
zte(cfg)#set igmp snooping add vlan 100，4000
zte(cfg)#set igmp snooping fastleave enable
ii. Configure IPTV
zte(cfg)#config nas
zte(cfg-nas)#iptv control enable
zte(cfg-nas)#iptv cac-rule enable
zte(cfg-nas)#iptv prv enable
iii. Configure rules on the port
zte(cfg-nas)#iptv channel mvlan 4000 group 225.1.1.1 name CCTV1
zte(cfg-nas)#iptv port 1 service start
zte(cfg-nas)#iptv port 1 control-mode channel
zte(cfg-nas)#iptv port 1 channel id 1 preview
iv. Configure preview template
zte(cfg-nas)#iptv view-profile name VPF1.PRF
zte(cfg-nas)#iptv view-profile name VPF1.PRF count 2
zte(cfg-nas)#iptv view-profile name VPF1.PRF blackout 10
zte(cfg-nas)#iptv view-profile name VPF1.PRF duration20
zte(cfg-nas)# iptv channel id 1 viewfile-name VPF1.PRF
v. View the configuration
/*view the preview template*/
zte(cfg-nas)#show iptv view-profile name vpf1
ViewProfile Id
MaxprvCount
MaxprvDuration
BlackoutInterval
/*view the user online condition when the user is online*/
zte(cfg-nas)#show iptv client index 0
Index :0
Rule :1
channel in disabled
Group Last_Report
---------------
225.1.1.1
MultiAddress
---------- -----------
225.1.1.1
63, port 1 connects with the user and it is
:1
:2
:20
:10
1 0
PortMember
--------------- -------
25.1.1.1
Vlan :100
ChNum :1
Ip :25.1.1.1
ElapsedTime
--------------
0:0:0:26
Vlan :100
0 0
1
id 1