Table of Contents
Advertisement
ZXR10 2900 Series User Manual
176
Confidential and Proprietary Information of ZTE CORPORATION
Command
aaa-control port <portlist>
zte(cfg-nas)#
port-mode {auto|force-unauthorized|fo
rce-authorized}
aaa-control port <portlist>
zte(cfg-nas)#
protocol {pap|chap|eap}
aaa-control port <portlist>
zte(cfg-nas)#
keepalive {enable|disable}
aaa-control port <portlist>
zte(cfg-nas)#
keepalive period <1-3600>
dot1x max-request <1-10>
zte(cfg-nas)#
dot1x quiet-period
zte(cfg-nas)#
<0-65535>
dot1x re-authenticate
zte(cfg-nas)#
{enable|disable}
Function
This configures the
authentication control
mode of the port.
auto: enable 802.1X
authentication on port.
force-unauthorized:
The authorization will
be forced to deny no
matter it is valid or
invalid.
force-authorized:
the authorization will be
forced to pass no matter
it is valid or invalid.
This sets the
authentication mode
of the port.
This enables/disables
the abnormal off-line
detection mechanism of
the port.
When the function is
enabled, vlanjump and
private MAC address
are not supported to be
used at the same time.
This sets the abnormal
off-line detection period
of the port.
The unit is second, the
default is 10s.
This sets the maximum
times of request
resending when the
timer expires before
the authentication
system receives the
Challenge response
from the client. The
default is 2.
This sets the interval
between the first
authentication failure
of the authentication
system and the next
authentication request.
The unit is second, the
default is 60s.
This enables/disables
re-authentication
mechanism.
Advertisement
Table of Contents
