Table of Contents
Advertisement
Command
set port <portlist> default-pri
zte(cfg)#
ority <0-7>
set port<portlist> remapping-
zte(cfg)#
tag <0-7> priority <0-7>
set port <portlist> security
zte(cfg)#
{enable | disable}
set port <portlist> unit-statistics
zte(cfg)#
{enable | disable}
set port <portlist> multicast-fil
zte(cfg)#
ter {enable | disable}
set port <portid> description
zte(cfg)#
<string>
set port <portlist> macaddress
zte(cfg)#
{on <1-100>[ unkown-filter-en]| off}
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 7 Service Configuration
Function
This sets the default
priority of a port.
It is a QoS related
configuration command
and used to specify the
priority of untag packet
received from this port.
The default priority
value is 0.
This sets 802.1P priority
remapping on a port.
This is a command
relates to QoS.
The port receives a
packet with tag which
includes priority setting
information. The packet
is mapped according to
the setting information
in the packet.
This enables or disables
the security function on
port.
This function is
used for access
and authentication.
Security function is
disabled by default.
This enables or disables
the statistics function of
port in unit time.
This configures whether
the port filters the
multicast packet.
It controls the
forwarding of unknown
multicast packet,
mainly cooperating with
the layer 2 multicast
(IGMP Snooping/IPTV).
This configures the
description information
of port.
<string>: should be
no more than 200
characters.
This sets the number of
MAC address that the
port can learn.
The parameter
unkown-filter-en is to
control the forwarding
of the unknown packet
on the port.
67
Advertisement
Table of Contents
