Igmp Snooping Configuration Example - Zte ZXR10 2900 Series User Manual

IGMP Snooping Configuration
Example
As shown in Figure
host. Port 10 is connected to the router.
and 5 into VLAN200, User on port 1, 3, and 5 send the multi-
cast join request packet whose multicast address is 230.44.45.167
and 230.44.45.157 respectively. Add multicast filter group ad-
dress 230.44.45.167 on VLAN200. The IGMP Snooping function
and IGMP Filter function are enabled and the snooping results are
displayed.
F 62 NETWORK TOPOLOGY FOR ONE-TO-MANY
IGURE
COMMUNICATION
The detailed configuration is as follows:
zte(cfg)#set vlan 200 add port 1，3，5，10 untag
zte(cfg)#set port 1，3，5，10 pvid 200
zte(cfg)#set vlan 200 enable
zte(cfg)#set igmp snooping enable
zte(cfg)#set igmp snooping add vlan 200
zte(cfg)#set igmp filter enable
zte(cfg)#set igmp filter add groupip 230.44.45.167 vlan 200
/*Display the multicast snooping results:*/
zte(cfg)#show igmp snooping vlan
Num VlanId Group
1 200 230.44.45.157
zte(cfg)#sho igmp filter
IGMP Filter: enabled
Index FilterIpAddress
---------------- ---------------- ---------------- -------------- ---
1 230.44.45.167
zte(cfg)#show igmp filter vlan 200
Maximal group number: 256
Current group number: 0
The filter address list of this vlan:
Index FilterIpAddress
----- ----- ----- ----- ----- ----- ----- ----- ----- -----
1 230.44.45.167
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 7 Service Configuration
62, ports 1, 3, and 5 are connected to the
Last_Report
192.168.1.1
Vlan
200
Vlan Type
200 Groupip
Add port 10, 1, 3,
PortMember
1，3，5，10
Port Type
------ Groupip
123