Qos Configuration Example; Figure 69 Qos Configuration Example - Zte ZXR10 2900 Series User Manual

Command
show qos policer [<0-255>]
zte(cfg)#
41. To view all the qos policy counters, use the following command.
Command
show qos counter [<0-31>]
zte(cfg)#
42. To view flow-based QoS application configuration, use the fol-
lowing command.
Command
show policy [qos-remark
zte(cfg)#
| mirror | redirect | vlan-remark |
statistic | policing [<0-255>]]

QoS Configuration Example

As show in Figure 69, set the bandwidth (both direction) of all the
user-interface as 2M. The uplink bandwidth of the switch is 20M.
The uplink port is port 26 and the client PC accesses the network
through port 24.
F 69 Q S C
IGURE O ONFIGURATION
Configuration of switch:
zte(cfg)#set bandwidth feport 1-24 ingress session 3 rate 2000
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 7 Service Configuration
Function
This views all the QoS
policers or a specified
policer.
Function
This views all the qos
policy counters.
Function
This views flow-based
QoS application
configuration.
E
XAMPLE
165