Qos Configuraton; Qos Overview - Zte ZXR10 2900 Series User Manual

Intelligent
Table of Contents

Advertisement

ZXR10 2900 Series User Manual
156
Confidential and Proprietary Information of ZTE CORPORATION
State
: passive
Filter
: deny ip any 192.168.0.1 255.255.255.255
TimeRange : worktime
2. ACL is available only in the time-range of 9:00-18:00.
zte(cfg)#show time-range
/*show time-range configuration. The time range activity is active*/
Supported
time-range number: 32
Configured time-range number: 1
name
----------------
worktime
zte(cfg)#show acl config 300
/*show the detailed configuration of ACL 300.
The ACL state binding with time-range is active. */
Acl No
: 300
Acl Name
:
Acl Type
: hybrid
Rule Number : 1
-----------------------------------------------------------------
RuleId
: 1
State
: active
Filter
: deny ip any 192.168.0.1 255.255.255.255
TimeRange : worktime

QoS Configuraton

QoS Overview

The switch provides the QoS function and the priority control func-
tion. The priority of the data packets can be determined by the
source MAC address priority of the data packets, VLAN priority,
802.1P user priority, layer 3 DSCP priority, or the default port pri-
ority. The priority of a data packet is determined in the following
sequence:
1. Priority of the data packets sent by CPU (determined by CPU).
2. Priority of the MGMT data packets (management data packets
such as the BPDU packets). The priority of the management
packets is determined by the initialization.
3. Priority of the static source MAC address.
4. VLAN priority.
5. 802.1P user priority.
6. Layer 3 DSCP priority.
7. Default port priority.
After the data packet priority is determined by the previous pri-
ority determination policy, the later policies are ignored. To use
the default port priority to decide the priority of the data packets
received by the port, all the following conditions shall be satisfied.
The data packets are not data packets sent by CPU or man-
agement data packets.
The source MAC address of the data packets cannot be the
static address or the port source priority function is disabled.
activity
type
----------
--------
active
period
range
-------------------------------
09:00 to 18:00 daily

Advertisement

Table of Contents
loading

Table of Contents