Table of Contents
Advertisement
ZXR10 2900 Series User Manual
QinQ Configuration Example
As shown in
Figure
46, encapsulate an exterior label in SW1
(ZXR10 2952) for the packet from SW2. The VLAN number is
100. The port connecting upstream BRAS in SW1 is port 24. The
port connecting downstream SW2 is port 1. The NM vlan of SW1
is 999 and the management IP address is 192.168.0.1/24.
F
46 Q
Q C
E
IGURE
IN
ONFIGURATION
XAMPLE
Configuration of switch:
Configuration on SW1(ZXR10 2952):
/* set qinq, the outer label is 100*/
zte(cfg)#set vlan 100 enable
zte(cfg)#set vlan 100 add port 1，24
zte(cfg)#set port 1，24 pvid 100
zte(cfg)#set qinq customer port 1 enable
zte(cfg)#set qinq uplink port 24 enable
zte(cfg)#set vlan 999 enable
zte(cfg)#config router
zte(cfg-router)#set ipport 1 ipaddress 192.168.0.1/24
zte(cfg-router)#set ipport 1 vlan 999
zte(cfg-router)#set ipport 1 enable
zte(cfg-router)#exit
88
Confidential and Proprietary Information of ZTE CORPORATION
Advertisement
Table of Contents
