Zxr10 2952; Zxr10 2952 Interfaces; Figure 4 Zxr10 2952 Front Panel; Table 3 Indicator Working State Of Zxr10 2928 - Zte ZXR10 2900 Series User Manual

1. System indicators include power indicator (SYS) and running
indicator (RUN).
After the system is powered up, the SYS indicator is on and
�
the RUN indicator is off.
When BootROM starts to load the version, if the version is
�
unavailable, the states of indicators do not change. If the
version is loaded normally, the RUN indicator flashes at a
frequency of one time per second.
2. The indicators of ZXR10 2928 (except power and system indi-
cators) are shown in
T 3 I
ABLE NDICATOR
Indicator
10/100 Base-T
Ports
10/100/1000
BASE-T Ports

ZXR10 2952

Front panel of ZXR10 2952 is shown in
F 4 ZXR10 2952 F
IGURE

ZXR10 2952 Interfaces

ZXR10 2952 provides the following types of access ports.
1. 48 fixed 10/100 BASE-T Ethernet ports, which support full/half
duplex, 10/100M adaptation, MDI/MDIX adaptation and VCT
automatic test function.
2. Two fixed 10/100/1000 BASE-T Ethernet ports.
3. Two fixed 1000BASE-X interfaces.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 3 Structure and Principle
Table 3.
W S ZXR10 2928
ORKING TATE OF
Position State
On
On the left side Off
of port
Flashing
On
On the right
side of port
Flashing
ACT indicator
On the left side
of port is flashing.
On the right LINK indicator
side of port is always on.
P
RONT ANEL
Meaning
Full-duplex
Half-duplex
Collision
condition
Link is
available.
Data is sent
and received.
Data is sent
and received.
LINK is
available.
Figure 4.
15