Table of Contents
Advertisement
ZXR10 2900 Series User Manual
210
Confidential and Proprietary Information of ZTE CORPORATION
Command
set group add device
zte(cfg-group)#
<idlist>
set group delete member
zte(cfg-group)#
<idlist>
set group name <name>
zte(cfg-group)#
set group handtime
zte(cfg-group)#
<1-300>
set group holdtime
zte(cfg-group)#
<1-300>
set group syslogsvr
zte(cfg-group)#
<A.B.C.D>
set group tftpsvr <
zte(cfg-group)#
A.B.C.D >
set group commander
zte(cfg-group)#
mac {<HH.HH.HH>|<HH.HH.HH.HH.HH.HH
>}<vid>
set group mac-mode
zte(cfg-group)#
standard
set group mac-mode
zte(cfg-group)#
extend [mac <HH.HH.HH.HH.HH.HH>]
erase member
zte(cfg-group)#
{<idlist>|all}
reboot member
zte(cfg-group)#
{<idlist>|all}
save member
zte(cfg-group)#
{<idlist>|all}
Function
This adds a member
based on temporary
device ID obtained
from collected topology
information.
This deleted a device
with specified member
ID from cluster.
This sets cluster name.
This sets a time interval
for handshake between
command switch and
member switch.
This sets effective
holding time of
information about
switches in cluster.
This sets IP address of
internal public SYSLOG
Server of cluster.
This sets IP address
of internal public TFTP
Server of cluster
This configures MAC
address of cluster
commander switch.
00.d0.d0 is required to
add on the front of MAC
address.
This configures the
protocol broadcast
address mode of
cluster management
as standard mode.
This configures the
protocol broadcast
address mode of
cluster management
as extended mode.
This deletes
configuration of
specified member
switch.
This restarts a specified
member switch.
This saves configuration
of specified member
switch.
Advertisement
Table of Contents
