Fdb Configuration Example; Figure 39 Fdb Configuration Example - Zte ZXR10 2900 Series User Manual

ZXR10 2900 Series User Manual
72 Confidential and Proprietary Information of ZTE CORPORATION
Command
show fdb mac <HH.HH.HH.HH.H
zte(cfg)#
H.HH>
show fdb port <portid>[detail]
zte(cfg)#
show fdb trunk <trukid>[detail]
zte(cfg)#
show fdb vlan <vlanid>[detail]
zte(cfg)#

FDB Configuration Example

As shown in Figure
through console port. Set the dynamic MAC aging time to 300S
. Bind a static MAC 00.D0.D0.29.20.92 in port 2 of VLAN 1. The
maximum number of access user of port 1 is 100. Forbid device
with MAC 00.D0.D0.00.00.01 access to the network.
F 39 FDB C
IGURE ONFIGURATION
Configuration of switch:
1. Configuration procedure:
zte(cfg)#set fdb agingtime 300
zte(cfg)#set fdb add 00.d0.d0.29.20.92 vlan 1 port 2
zte(cfg)#set fdb filter 00.d0.d0.00.00.01 vlan1
zte(cfg)#set port 1 macaddress on 100
2. Configuration check:
i. This following example describes how to show the total MAC
address table.
zte(cfg)#show fdb detail
MacAddress
-----------------
00.00.00.00.00.01
00.00.00.00.00.0b
39, this sets MAC address table management
E
XAMPLE
Vlan PortId
----- --------
1 1
1 1
Function
This displays the fdb
information of MAC
address.
This displays the fdb
information of a port.
This displays the fdb
information of a Trunk
group.
This displays the fdb
information of a VLAN.
Type
--------
dynamic
dynamic