Table of Contents
Advertisement
Command
set igmp snooping
zte(cfg)#
query-interval <10-2147483647>
set igmp snooping
zte(cfg)#
response-interval <10-250>
set igmp snooping
zte(cfg)#
last-member-query <10-250>
set igmp snooping fastleave
zte(cfg)#
{enable|disable}
set igmp snooping crossvlan
zte(cfg)#
{enable|disable}
set igmp filter {enable|disable}
zte(cfg)#
set igmp filter add groupip
zte(cfg)#
<A.B.C.D> vlan <vlanlist>
set igmp filter delete groupip
zte(cfg)#
<A.B.C.D> vlan <vlanlist>
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 7 Service Configuration
Function
This sets the snooping
interval. the default
value is 1250,
which represents
125 seconds. 10
represents 1 second,
20 represents 2
seconds....2147483647
represents
214748364.7 seconds.
This sets the snooping
response interval. The
default value is 100,
which represents 10
seconds. 10 represents
1 second, 20 represents
2 seconds....250
represents 25 seconds.
This sets the snooping
interval of last member.
The default value is
10. 10 represents 1
second, 20 represents
2 seconds....250
represents 25 seconds.
This enables or disables
the IGMP fastleave
function. The default is
disable.
This enables or disables
cross-vlan snooping
function. The default is
disable.
This enables or disables
the IGMP filter. The
default is disable.
This adds multicast
filter group address into
the specified multicast
monitor VLAN.
The parameter groupip
<A.B.C.D>: IP address,
the range is from
224.x.x.x to 239.x.x.x
except 224.0.0.x.
This deletes multicast
filter group address
from the specified
multicast monitor
VLAN.
121
Advertisement
Table of Contents
