Zte ZXR10 2900 Series User Manual page 80

ZXR10 2900 Series User Manual
68 Confidential and Proprietary Information of ZTE CORPORATION
Command
set port <port-list>
zte(cfg)#
mac-learning {enable | disable}
set port <portlist> acl
zte(cfg)#
<acl-number>{enable | disable}
set port <portlist>vlanjump
zte(cfg)#
{enable [defaultauthvlan<1-4094>]|
disable}
set port <portlist> vlan-attrib
zte(cfg)#
ute <vlanlist>{untag | tag}
set queue-schedule feport
zte(cfg)#
<portlist>{ wrr0 | wrr1-sp | wrr2-sp |
sp}
set queue-schedule geport
zte(cfg)#
<portlist> session <0,1>
Function
This enables or disables
port mac-learning.
This controls MAC
learning on port. The
function is disabled by
default. It learns and
forwards the accessing
packet on port.
This configures the port
bind with ACL rule.
This configures the
VLAN that 802.1x
unauthorization user
can access.
This function is
mainly used with user
accessing.
This configures
the corresponding
configuration between
port and vlan.
The port and vlan has
to be configured one to
one.
This sets the
queue-schedule mode
of 100Mbps port.
This command relates
to QoS and sets the
queue-schedule mode
on 100Mbps port.
� wrr0
queue-schedule
mode 0 :
WRRWRRWRRWRR
� SP
queue-schedule
mode 1 : SPSPSPSP
�
WRR1-SP
queue-schedule
mode 2 :
WRRWRRWRRSP
�
WRR2-SP
queue-schedule
mode 3 :
WRRWRRSPSP
This sets the
queue-schedule mode
of gigabit port
This command relates
to QoS configuration.