Epon Configuration Example - Zte ZXR10 2900 Series User Manual

... .../*the display of vlan5-vlan4093 is omitted*/
The following example shows that daughter card is not added
with ZXR10 2920/2928.
zte(cfg)#show vlan
3. VLAN Translation
Command
zte(cfg)#
ingress-port <feport-id> ingress-vlan
<vlan-list> egress-port <geport-id>
egress-vlan <vlan-list>
After ZXR10 2920/2928 adds with PON daughter card, the
translation port will discard the TAG packet without transla-
tion rule.
When ZXR10 2920/2928 doesn't add with PON daughter card,
the translation port will forwards all packets and not discard
any packet.
4. IGMP Snooping Function
After ZXR10 2920/2928 adding with PON daughter card, add
port-based multicast control on the basis of vlan-based multi-
cast control.

EPON Configuration Example

Example This example describes how to distribute service to ONU by OLT
Description
device, and how to view the service configuration information on
ONU device.
Forbidden ports :
VlanId : 4094 VlanStatus: enabled
VlanName:
VlanMode: Static
Tagged ports : 1-19
Tagged trunks : 1-15
Untagged ports :
Forbidden ports :
VlanType: 802.1q vlan
VlanId : 1 VlanStatus: enabled
VlanName:
VlanMode: Static
Tagged ports :
Untagged ports : 1-18
Untagged trunks : 1-15
Forbidden ports :
Total Vlans: 1
set vlan-translation
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 7 Service Configuration
Function
This configures VLAN
translation function
and the related
functional port and
VLAN.
143