Syslog Configuration; Syslog Overview; Basic Configuration Of Syslog; Table 14 Syslog Log Information - Zte ZXR10 2900 Series User Manual

ZXR10 2900 Series User Manual
182 Confidential and Proprietary Information of ZTE CORPORATION

Syslog Configuration

Syslog Overview

Syslog is an important part of Ethernet switch and is the infor-
mation junction center of system software module. Syslog man-
ages most of important information output and classifies in detail
, which filters the information effectively and provides the strong
support for network administrator and development staff to mon-
itor network running status and diagnose network fault.
Syslog is classified by information source and information is filtered
by function module, which satisfies user customized demand.
As shown in Table 14, syslog can classify the log information from
the top down into eight levels according to importance. Informa-
tion filters from low level to high level.
T 14 S L
ABLE YSLOG OG
Severity Level
Emergencies
Alerts
Critical
Errors
Warnings
Notifications
Informational
Debugging

Basic Configuration of Syslog

To configure Syslog, perform the following steps.
Command
set syslog {enable | disable}
zte(cfg)#
set syslog module {all|alarm|c
zte(cfg)#
ommandlog|radius|AAA}{enable|disa
ble}
I
NFORMATION
Description
crucial fault
the fault that must be corrected
quickly
key fault
the fault need to be noticed but not
important
warn , maybe a mistake exists
the information that needs to be
noticed
general prompt information
debug information
Function
This enables or disables
syslog. By default
syslog is disabled.
This enables or disables
syslog module.