Vbas Configuration; Vbas Conifguration Overview; Figure 65 Dhcp Snooping Configuration Example - Zte ZXR10 2900 Series User Manual

ZXR10 2900 Series User Manual
136 Confidential and Proprietary Information of ZTE CORPORATION
F 65 DHCP S
IGURE NOOPING
Configuration of switch:
zte(cfg)#set dhcp en
zte(cfg)#set dhcp port 1 client
zte(cfg)#set dhcp port 2 server
zte(cfg)#set dhcp snooping add port 1-2
zte(cfg)#set dhcp ip-source-guard add port 1
zte(cfg)#show dhcp
DHCP is enabled.
PortId PortType
------ --------
1 Client
2 Server
3 Client
4 Client
5 Client
6 Client
zte(cfg)#show dhcp snooping
DHCP snooping is enabled on the following port(s):
PortId PortType
------ --------
1 Client
2 Server
zte(cfg)#show dhcp ip-source-guard
Ip source guard is configured on the following port(s):

VBAS Configuration

VBAS Conifguration Overview

VBAS is not physical equipment but a protocol standard, which is
developed by Guangdong Institute of China Telecom. VBAS is to
solve the problem of wide-band user identifier. When BAS gets
user identifier by inquiring corresponding relationship between
MAC of users dialing to the switch and port, then sends user
name, password and identifier information to RADIUS, it can
judge the position of the user.
Layer 2 communication mode is implemented between BAS and
switches, that is, information query and response data packets
C
ONFIGURATION
Snooping Option82
-------- --------
Enabled Disabled
Enabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
E
XAMPLE