Zte ZXR10 2900 Series User Manual page 170

ZXR10 2900 Series User Manual
158 Confidential and Proprietary Information of ZTE CORPORATION
Command
set qos priority-map geport
zte(cfg)#
ip-priority <0-63> traffic-class <0-7>
5. To set the mapping between IP DSCP priority and user priority
on gigabit port, use the following command.
Command
set qos priority-map geport
zte(cfg)#
ip-priority <0-63> user-priority <0-7>
6. To configure the weight of port queue on 100M port, use the
following command.
Command
set qos queue-schedule
zte(cfg)#
feport queue0-weight <1-32> queu
e1-weight <1-32> queue2-weight
<1-32> queue3-weight <1-32>
There are 4 100M queues, queue0-weight <1-32> is the
weight of queue 0, queue1-weight <1-32> is the weight of
queue 1, queue2-weight <1-32> is the weight of queue 2,
queue3-weight <1-32> is the weight of queue 3.
7. To configure the weight of queue-schedule on gigabit port, use
the following command.
Command
set qos queue-schedule
zte(cfg)#
geport session <0,1> queue <0-7>{sp
| sdwrr <0,1> weight <1-32>}
The gigabit port has 8 queues (0-7). sp is the absolute priority
mode. sdwrr number has sdwrr0 and sdwrr1. Weight <1-32>
is the queue weight number.
8. To configure the schedule mode of 100M port, use the following
command.
Command
set queue-schedule feport
zte(cfg)#
<port-list>{ wrr0 | wrr1-sp | wrr2-sp |
sp}
wrr0: queue 3, 2, 1 and 0 all adopt WRR mode.
�
Function
This sets the mapping
between IP DSCP
priority and queue
priority on gigabit port
Function
This sets the mapping
between IP DSCP
priority and user
priority on gigabit
port.
Function
This configures the
weight of port queue
on 100M port.
Function
This configures
the weight of
queue-schedule on
gigabit port.
Function
This configures the
schedule mode of
100M port.