Layer 2 Protocol Transparent Transmission Configuration Example; Figure 70 L2Pt Configuration Example - Zte ZXR10 2900 Series User Manual

ZXR10 2900 Series User Manual
168 Confidential and Proprietary Information of ZTE CORPORATION
Command
set l2pt <protocol-list>{enable
zte(cfg)#
| disable | invalid}
show l2pt
zte(cfg)#
Layer 2 Protocol Transparent
Transmission Configuration Example
As shown in Figure 70, set the LACP transparent transmission func-
tion of L2pt of switch1 to implement the link aggregation between
switch2 and switch3. The configuration increases the link band-
width and realizes the redundant backup.
F 70 2 C
IGURE L PT ONFIGURATION
Configuration of switch:
zte(cfg)#set lacp enable
zte(cfg)#set lacp aggregator 1 add port 1，2
Function
This enables or disables
L2pt transparent
transmission function.
enable is to enable
layer 2 transparent
transmission, disable
is to disable layer
2 transparent
transmission, invalid
is to make layer 2
transparent invalid. All
the layer 2 transparent
protocols are invalid by
default.
This displays the
configuration of
L2pt transparent
transmission.
E
XAMPLE