adopts the VT100 terminal mode. The following takes the con-
figuration of HyperTerminal provided by the Windows operating
system as an example.
1. Select Start > Programs > Accessories > Communica-
tions > HyperTerminal, on the PC screen to start the Hy-
perTerminal, as shown in
F
29 STARTING THE HYPERTERMINAL
IGURE
2.
Input the related local information in the interface as shown
in
Figure
30.
F
30 LOCATION INFORMATION
IGURE
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 4 Installation and Debugging
Figure 29
.
35