Zte ZXR10 2900 Series User Manual page 165

16. To show the commands that can be used on ACL configuration
mode, use the following command.
Command
zte(hybrid-acl-group)#
This command is only used on ACL configuration mode, and
then all the commands on this ACL mode will be shown.
17. To configure ACL information on port, use the following com-
mand.
Command
set port <portlist> acl
zte(cfg)#
<acl-number>{enable | disable}
18. To set ACL information on trunk port, use the following com-
mand.
Command
set trunk <trunklist> acl
zte(cfg)#
<acl-number>{enable | disable}
19. To delete ACL instance, use the following command.
Command
clear acl {basic | extend |
zte(cfg)#
link | hybrid} number <acl-number>
20. To configure time-range, use the following command.
Command
set time-range <name>
zte(cfg)#
range {period | absolute}<start-time>
to <end-time>{daily | day-off |
day-working | monday | tuesday
| wednesday | thursday | friday |
saturday | sunday}
Day-off implies Saturday and Sunday. Day-working implies
from Monday to Friday.
21. To bind ACL rule with the time-range, use the following com-
mand.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 7 Service Configuration
Function
list This displays the
commands that can
be used on ACL
configuration mode.
Function
This sets ACL
information on port.
Function
This sets ACL
information on trunk
port.
Function
This deletes ACL
instance.
Function
This configures
time-range.
153