Zte ZXR10 2900 Series User Manual page 110

ZXR10 2900 Series User Manual
98 Confidential and Proprietary Information of ZTE CORPORATION
Command
set stp instance <0-15> port
zte(cfg)#
<portname>loop-guard{enable|disable}
set stp instance <0-15> trunk
zte(cfg)#
<trunkname> cost <1-200000000>
set stp instance <0-15>
zte(cfg)#
trunk <trunkname> root-guard
{enable|disable}
set stp instance <0-15> trunk
zte(cfg)#
<trunkname>loop-guard{enable|disab
le}
set stp port <portlist>{enable
zte(cfg)#
|disable}
set stp trunk <trunklist>{enab
zte(cfg)#
le|disable}
set stp port <portlist>
zte(cfg)#
bpdu-guard{enable|disable}
set stp port <portlist> pcheck
zte(cfg)#
set stp bpdu-interval
zte(cfg)#
<10-65535>
set stp port <portlist> linktype
zte(cfg)#
{point-point|shared}
set stp trunk <trunklist>
zte(cfg)#
linktype {point-point|shared}
set stp port <portlist>
zte(cfg)#
packettype {IEEE|CISCO|HUAWEI|
HAMMER|extend}
set stp trunk <trunkid>
zte(cfg)#
packettype {IEEE|CISCO|HUAWEI|
HAMMER|extend }
set stp hellotime <1-10>
zte(cfg)#
set stp forwarddelay <4-30>
zte(cfg)#
set stp agemax <6-40>
zte(cfg)#
Function
This enables/disables
instance port loop
protection.
This sets instance trunk
cost.
This enables/disables
instance trunk root
protection.
This enables/disables
instance trunk loop
protection.
This enables/disables
port stp function.
This enables/disables
trunk stp function.
This enables/disables
port bpdu protection.
This sets port stp type
check.
This sets BPDU
protection port
linkdown interval, the
default is 100, the unit
is s.
This sets instance port
Linktype.
This sets instance trunk
Linktype.
This sets instance port
packet type.
This sets instance trunk
packet type.
This sets STP
notification interval,
the default is 2, unit is
s.
This sets STP
forwarding delay time,
the default is 15, unit is
s.
This sets STP aging
time, the default is 20,
unit is s.