Zte ZXR10 2900 Series User Manual page 128

ZXR10 2900 Series User Manual
116 Confidential and Proprietary Information of ZTE CORPORATION
VLAN:
zxr10(cfg)#set vlan 100 add port 1，2
zxr10(cfg)#set vlan 4000 add port 1，2 tag
zxr10(cfg)#set vlan 100，4000 enable
zxr10(cfg)#set port 1，2 pvid 100
STP:
zxr10(cfg)#set stp instance 1 add vlan 100
zxr10(cfg)#set stp enable
ZESR:
zxr10(cfg)#set zesr domain 1 add control-vlan 4000
zxr10(cfg)#set zesr domain 1 add protect-instance 1
zxr10(cfg)#set zesr domain 1 add primary-port 1
zxr10(cfg)#set zesr domain 1 add secondary-port 2
zxr10(cfg)#set zesr domain 1 level 1 segment 1 mode master
zxr10(cfg)#set zesr domain 1 enable
Configuration descriptions are shown below.
1. The intersecting node of the primary ring and the hierarchical
ring must be Edge-Port or Edge-Transit.
2. The port connecting the primary ring and the hierarchical ring
must be Edge-Port.
3. The edge-port has two attributes: not Master and Master. The
attribute not Master is used in the condition that the master of
the hierarchical ring exists. Master is used in the condition that
the master does not exist and the edge-port master serves as
the master.
4. The edge-port with Master attribute must be set on edge-mas-
ter.