Layer 2 Control Message Transparent Transmission Vpls Network Configuration Example; Mpls L2Vpn Maintenance And Diagnosis; Vpws Maintenance And Diagnosis - Zte ZXR10 8900 Series User Manual

ZXR10 8900 Series User Manual (MPLS Volume)
St-
Command
ep
1
show mpls l2transport vc [{vcid
ZXR10#
<vcidmin>[<vcidmax>]| interface <interface-
name>[<loca-lcircuit-id1>[<local-circuit-id2>]]|
destination <ip-addr>}][detail]
2 show mpls l2transport binding
ZXR10#
[<vc-id>|<ip-address>|local-label < local-label>|
remote-label <remote-label >]
62 Confidential and Proprietary Information of ZTE CORPORATION
For other configurations, refer to PE1.
PE10 configuration:
PE10(config)#vfi vpls_a
PE10(config-vfi)#peer 1.1.1.2 spoke
For other configurations, refer to PE1.
PE20 configuration:
PE20(config)#vfi vpls_a
PE20(config-vfi)#peer 1.1.1.2 spoke
Layer 2 Control Message Transparent
Transmission VPLS Network
Configuration Example
Layer 2 control message forwarding policy is applied in a vfi on a
PE device, such as configuring lldp and stp message transparent
transmission.
ZXR10(config)# vfi test
ZXR10(config-vfi)# vcid 1
ZXR10(config-vfi)# pwtype ethernet
ZXR10(config-vfi)# l2protocol-tunnel lldp
ZXR10(config-vfi)# l2protocol-tunnel stp
MPLS L2VPN Maintenance
and Diagnosis

VPWS Maintenance and Diagnosis

To configure VPWS maintenance and diagnosis, perform the fol-
lowing steps.
Function
This checks whether VC is
established
This checks VC binding
information