Layer 2 Protocol Transparent Transmission Configuration - Zte ZXR10 5250 Series Configuration Manual

ZXR10 5250 Series Configuration Guide
l Configuration Verification
zte(cfg)#show vlan pvlan
pvlan session
promis-ports
promis-trunks
isolate-ports
isolate-trunks
community-ports
community-trunks :
pvlan session
promis-ports
promis-trunks
isolate-ports
isolate-trunks
community-ports
community-trunks :
5.14 Layer 2 Protocol Transparent Transmission
Configuration
Layer 2 Protocol Transparent Transmission Overview
IEEE 802.1x is a Port-Based Network Access Control protocol. Port-based network
access control is a way to authenticate and authorize the users to be connected to
the LAN equipment.
identification method in the LAN.
The ZXR10 5250 provides 802.1x transparent transmission function which transparently
transmits 802.1x protocol packets from the client to the authentication server for
authentication.
The ZXR10 5250 provides 802.1x transparent transmission function. It also provides
layer-2 transparent transmission function such as STP, LACP/OAM, ZGMP,LLDP and
GVRP. The protocol range is 0x00, 0x02-0x2f.
The common layer-2 protocols are shown below.
Protocol Number
0x00
0x02
0x03
0x09
0x0E
SJ-20131111172707-002|2013-11-27 (R1.0)
: 1
: 16
:
: 1-3
:
:
: 2
:
: 1
: 4-6
:
:
This type of authentication provides a point-to-pint subscriber
5-62
Protocol
STP
LACP/OAM
802.1x
ZGMP
LLDP
ZTE Proprietary and Confidential