Qos Configuration Example; Typical Qos Configuration Example - Zte ZXR10 5900 Series User Manual

ZXR10 5900/5200 Series User Manual (Basic Configuration Volume)
This example shows the conduction of traffic statistics to data
Example
whose destination IP address network segment is 67.100.88.0/24
on the port gei_1/8.
ZXR10(config)#acl extend number 100
ZXR10(config-ext-acl)#rule 1 permit ip 168.2.5.5 0.0.0.0 any
ZXR10(config-ext-acl)#rule 2 permit ip any 67.100.88.0 0.0.0.255
ZXR10(config-ext-acl)#exit
ZXR10(config)#traffic-statistics 100 rule-id 2 pkt-type all statistics-type byte
ZXR10(config)#interface gei_1/8
ZXR10(config-gei_1/8)#ip access-group 100 in

QoS Configuration Example

Typical QoS Configuration Example

Network A, Network B and internal servers are all connected to an
Ethernet switch, as shown in Figure 20. One of internal servers
is the VOD server with the IP address of 192.168.4.70. To guar-
antee service quality of the VOD, configure it as one with high
priority. The internal user can access the Internet over the agent
192.168.3.100 but the bandwidth of Network A and Network B
should be restricted and their traffic statistics should be conducted.
F 20 QOS CONFIGURATION EXAMPLE
IGURE
Switch configuration:
ZXR10(config)#acl extend number 100
ZXR10(config-ext-acl)#rule 1 permit tcp any 192.168.4.70 0.0.0.0
ZXR10(config-ext-acl)#rule 2 permit ip any 192.168.3.100 0.0.0.0
ZXR10(config-ext-acl)#rule 3 permit ip any any
78 Confidential and Proprietary Information of ZTE CORPORATION