Power Requirements - NCR 7158 Owner's Manual

Power Requirements

Switch 1 is shown
in the ON position
On
Off
4 3 2 1
DIP Switch
Location of Human and Electrical Interfaces
The 7158 draws 24VDC ±10% power from its standard 55W, or
optional 75W, remote supply. The 7158 printer can accept 24VDC ±10%
power from a host terminal. To meet NEC Class 2 safety requirements,
the host terminal must provide a time delay fuse on the 24V input.
Print Station
Slip station:
15 Dots/Char. Avg.
Solid Graphics
2
Receipt Station
25% Dot Coverage
50% Dot Coverage
Note 1. At rated speed of 260 CPS.
Note 2. Unidirectional printing.
Note 3. At rated speed of 130mm/second.
DIP Switch
Maximum Current
55 Watt Source
6.0A Peak
2.0A Average
1
6.0A Peak
2.3A Average
3
3
Chapter 5: Technical Specifications 5-25
Back of Printer
75 Watt Source
6.0A Peak
2.7A Average
9.0A Peak
3.1A Average