Select Character Size - NCR 7158 Owner's Manual

Select Character Size

ASCII:
Hexadecimal:
Decimal:
Value of n:
Range of n:
Default of n:
Selects the character height using bits 0 to 2 and selects the character
width using bits 4 to 7, as follows:
Character Width Selection
Hex Decimal
00 0
10 16
20 32
30 48
40 64
50 80
60 96
70 112
Character Height Selection
Hex Decimal
00 0
01 1
02 2
03 3
04 4
05 5
06 6
07 7
GS ! n
1D 21 n
29 33 n
1 - 8 = vertical number of times normal font
1 – 8 = horizontal number of times normal font
00 – 07, 10 – 17, ... 70 – 77
0
Width
1 (normal)
2 (two times width)
3 (three times width)
4 (four times width)
5 (five times width)
6 (six times width)
7 (seven times width)
8 (eight times width)
Height
1 (normal)
2 (two times height)
3 (three times height
4 (four times height)
5 (five times height)
6 (six times height)
7 (seven times height)
8 (eight times height)
Chapter 7: Programming Guide 7-69