Select Bar Code Width - NCR 7158 Owner's Manual

Exceptions:
Illegal data cancels this command.
The command is valid only at the beginning of a line.
PDF 417 format cannot be printed on the slip.
Barcodes on the Slip are always right justified.
PDF417 and Code 93 are only available in A758 Native Mode.

Select Bar Code Width

ASCII:
Hexadecimal:
Decimal:
Value of n:
Default :
Formulas:
n + 1/8 mm (n + 1/203 inch) for receipt, n + 1/5.7 mm (n + 1/144 inch)
for slip.
Slip module sizing: n must be even (it is rounded up if odd) and the
size of modules is n + 1/5.7 mm (n + 1/144 inch).
GS w n
1D 77 n
29 119 n
1, 2, 3, 4, 5
3 for receipt; 2 for slip
Sets the bar code width to n dots.
Chapter 7: Programming Guide 7-119