Set Line Spacing - NCR 7158 Owner's Manual

Set Line Spacing

ASCII:
Hexadecimal:
Decimal:
Value of n:
Range of n:
Default:
Sets the line spacing for the receipt and for the slip. For the receipt the
spacing is set to n/406 inches. For the slip, the line spacing is set to
n/144 inches. The line spacing equals the character height when n is
too small.
If the Set Horizontal and Vertical Minimum Motion Units command
(1D 50) is used to change the horizontal and vertical minimum motion
unit, the parameters of this command (Set Line Spacing) will be
interpreted accordingly.
Related Information:
For more information, see the description of the Set Horizontal and
Vertical Minimum Motion Units command in this document.
ESC 3 n
1B 33 n
27 51 n
n/406 inches on receipt
n/144 inches in slip
0 – 255
Receipt .13 inch (3.37 mm or 7.52 lines per inch, 3
extra dot rows.)
Slip .14 inch (7.2 lines per inch, 3 extra dot rows.)
Chapter 7: Programming Guide 7-41