Select Or Cancel Italic Print - NCR 7158 Owner's Manual

Select or Cancel Italic Print

ASCII:
Hexadecimal:
Decimal:
Value of n:
Default:
Turns Italic print mode on or off. This command is only available in
A758 Native Mode. Italic print mode is available for built-in, user-
defined characters. This command only works on the receipt station.
Exceptions:
Only the lowest bit of n is valid. This command is only valid for the
receipt station in A758 Native Mode.
ESC I n
1B 49 n
27 73 n
0 = Off
1 = On
(When 0 and 1 are the Least Significant Bit, LSB)
0 (Off)
Chapter 7: Programming Guide 7-65