Cancel User-Defined Characters; Select Or Cancel Emphasized Mode - NCR 7158 Owner's Manual

Cancel User-Defined Characters

ASCII:
Hexadecimal:
Decimal:
Value of n:
Range of n:
Cancels the pattern defined for the character code specified by n. After
the user-defined character is canceled, the corresponding pattern from
Code Page 437 is printed.
Exceptions:
This command is ignored if n is out of range or if the user-defined
character is not defined.

Select or Cancel Emphasized Mode

ASCII:
Hexadecimal:
Decimal:
Value of n:
Range of n:
Default:
Starts or stops emphasized printing on slip and receipt. In Emphasized
Mode on the slip, each line is printed twice to improve penetration of
multi-part forms and increase print contrast. The second pass is printed
the same direction as the first to ensure accuracy of the overprint.
Printing speed decreases due to the second printing pass.
Exceptions:
Only the lowest bit of n is effective. Emphasized printing cannot be
used with bit-images or downloaded bit-images.
Related Information:
This command and the Select Print Mode(s) command (1B 21) function
identically.
ESC ? n
1B 3F n
27 63 n
Specified character code
32 - 255
ESC E n
1B 45 n
27 69
0 (bit 0), not selected
1 (bit 0), selected
0 - 255
0 (bit 0)
Chapter 7: Programming Guide 7-63