Chapter 4: Printer & Media Supplies; Ordering Thermal Paper; Thermal Paper Specifications - NCR 7158 Owner's Manual

Printer & Media Supplies
Chapter 4:

Ordering Thermal Paper

Thermal Paper Specifications

The printer requires qualified thermal paper with the following
dimensions:
Width
80 mm + .2 mm - .6 mm
(3.15 + .008 in. - .024 in.)
The paper must not be attached at the core. Use paper with a colored stripe at
the end to indicate that the paper is running low.
The above lengths are based on a core diameter of 22 ± .5 mm (.87 in.) outside,
1.5 ± .5 mm (.45 in.) inside.
NCR can provide paper in small lots to facilitate product evaluation
and testing.
To order paper rolls, contact your sales representative or order directly
from NCR at the following address or toll free number:
NCR Corporation
Systemedia
9995 Washington Church Road
Miamisburg, OH 45342
1-800-543-8130
Use the following part numbers:
Standard Density
Light Density
Diameter
90 mm max.
(3.54 in.)
50 Rolls, 90mm diameter
50 Rolls, 90mm diameter
Length
98 meters (322 ft.) 2.4 mil thick
73.5 meters (241 ft.) 3.2 mil thick
NCR #A152-0034
NCR #A152-0035