Print Characteristic Commands
These commands control what the printed information looks like:
selection of character sets, definition of custom-defined characters, and
setting of margins. The commands are described in order of their
hexadecimal codes
Select Double-Wide Characters
ASCII:
Hexadecimal:
Decimal:
Prints double-wide characters. The printer is reset to single-wide mode
after a line has been printed or the Clear Printer (0x10) command is
received. Double-wide characters may be used in the same line with
single-wide characters.
Select Single-Wide Characters
ASCII:
Hexadecimal:
Decimal:
Prints single-wide characters. Single-wide characters may be used in
the same line with double-wide characters.
DC2
12
18
DC3
13
19
Chapter 7: Programming Guide 7-53