Cancel Print Data In Page Mode; Print Data In Page Mode - NCR 7158 Owner's Manual

Cancel Print Data in Page Mode

ASCII:
Hexadecimal:
Decimal:
Deletes all the data to be printed in the "page" area. Any data from the
previously selected "page" area that is also part of the current data to
be printed is deleted.
This command has the same code as the Open Form command, which
is performed when the printer is not in Page Mode.
Exceptions:
This command is only used in Page Mode.

Print Data in Page Mode

ASCII:
Hexadecimal:
Decimal:
Collectively prints all buffered data in the printing area.
After printing, the printer does not clear the buffered data and sets
values for Select Print Direction in Page Mode (1B 54 n) and Set Print
Area in Page Mode (1B 57...), and sets the position for buffering
character data.
Exceptions:
This command enabled only in Page Mode.
CAN
18
24
ESC FF
1B 0C
27 12
Chapter 7: Programming Guide 7-121