Connecting The Cables; Communication Cable - NCR 7158 Owner's Manual

Connecting the Cables

Communication Cable

Caution: Connect the cables to the printer before plugging in the
power supply. If power is received from the host computer, turn it off
before connecting any cables.
Back of
Cash
Printer
Drawer Switches
Connector
Note: Depending on your printer configuration, the connector panel
may vary from the above illustration.
The communication cable connects the printer to the host computer. To
install the communication cable:
1. Turn off the host computer.
2. Secure the communication cable to its connector under the printer
in the location previously shown.
3. Connect the cable to the host computer.
Strain Relief
DIP Communication
Power
Supply Connector
Connector (9-pin connector
Chapter 2: Setup Guide
shown)
2-5